Rust-Oleum Stops Rust protective enamel with custom spray five-in-one lets you choose from five spray patterns with a twist of the dial. Use the high-output spray for large curved surfaces, standard for a traditional experience, low output for details and corners without drips and runs and vertical or horizontal fans for flat surfaces. Whether you're painting wide spaces, tight corners or textured surfaces, protective enamel with custom spray five-in-one gives you ultimate control for excellent results. When you're done, turn the dial to the lock position and store the remaining spray paint for your next project. The advanced Stops Rust formula delivers 30% greater corrosion resistance and enhanced color retention compared to original matching Stops Rust colors with the standard spray paint tip. The durable, protective coating provides ultimate rust prevention for a long-lasting finish and excellent resistance to abrasion, fading, chipping and dulling. Apply this fast-drying paint on indoor and outdoor metal and wood projects for a long-lasting excellent results.
| Applicable Materials | : | Ferrous, Non-Ferrous Metal and Wood |
| Application Method | : | Spray |
| Base Type | : | Oil |
| Boiling Point | : | -37 to 537 deg C |
| Color | : | Blue Haven |
| Compositions | : | Propane, Acetone, Hydrotreated Light Distillate, Titanium Dioxide, n-Butane, Hydrous Magnesium Silicate, Xylenes, n-Butyl Acetate, Barium Sulfate, Ethylbenzene, Propylene Glycol Monobutyl Ether, Kaolin Clay, bis(1, 2, 2, 6, 6-Pentamethyl-4-Piperidinyl) |
| Container Type | : | Can |
| Coverage Area | : | 6 to 10 sq-ft/can |
| Drying Time | : | 2 to 4 hr |
| Flammability Rating | : | 4 |
| Flash Point | : | -96 deg C |
| Interior/Exterior | : | Exterior |
| Net Content | : | 12 oz |
| Resists | : | Corrosion |
| Sheen | : | Satin |
| Specific Gravity | : | 0.846 |
| Temperature Rating | : | 50 to 90 deg F |
- Intuitive spray patterns that give the ultimate control when painting
- 360 deg any angle spray technology
- Fast dry times dries to the touch in 2 to 4 hr, recoat within 1 hr or after 48 hr
SDS
Video Link