X-I-M 11466
XIM’s Peel Bond™ is a unique, high-build, water-based, penetrating, bonding primer/sealer. It is formulated to bond-to and seal a wide range of construction materials. It can reduce the cracking and peeling or the top coat paint by remaining flexible over the life of the paint. It can help reduce the time spent on surface preparation, however, it is not a complete substitute for all surface preparation and all surface conditions.
| Applicable Materials | : | Aluminum, Fiberglass, Galvanized Metal, PVC, Wood |
| Application Method | : | Brush, Pad, Roller, Spray |
| Application Temperature | : | 40 to 100 deg F |
| Boiling Point | : | 100 to 537 deg C |
| Compositions | : | Kaolin Clay, Hydrous Magnesium Silicate, Aliphatic Petroleum Distillates, Propylene Glycol Phenyl Ether, 2, 2, 4-Trimethyl-1, 3-Pentanediol Isobutyrate, Oxirane, 2-Methyl-, Polymer with Oxirane, Monobutyl Ether, 5-Chloro-2-Methyl-4-Isothiazolin-3-one Mixture with 2-Methyl-4-Isothiazolin-3-one |
| Coverage Area | : | 50 to 100 sq-ft/gal |
| Drying Time | : | 30 to 60 min |
| Flammability Rating | : | 1 |
| Flash Point | : | 94 deg C |
| Net Content | : | 5 gal |
| Odor/Scent | : | Solvent |
| Pigment Type | : | Aluminum Silicate, Calcium Carbonate, Crystalline Silica, Zinc Oxide |
| VOC Content | : | 99 g/L |
| Vehicle Type | : | Water-Based Acrylic |
- Applies up to 30 mils wet
- Reduces labor and prep time
- Bonds to plywood, T1-11, PVC, aluminum and more
- Cures at temperature as low as 40 deg F surface temperature and cures at humidity up to 90%
- For interior or exterior use
SDS
