Diamond Home Improvement
Currently shopping at Klamath Falls
WATCO 67131
WATCO teak oil is specifically formulated for dense woods such as teak, rosewood or mahogany. WATCO Teak Oil penetrates deep into wood pores to create the rich, warm glow of a hand-rubbed finish. It takes less than an hour to treat your wood with WATCO Teak Oil - simply wipe, brush or spray it on and wipe off. WATCO Teak Oil is the choice of fine woodworkers and novices alike. Please read product labels for additional directions and precautions before using.
| Applicable Materials | : | Wood |
| Application Method | : | Brush, Spray, Wipe |
| Boiling Point | : | -18 to 316 deg C |
| Compositions | : | Naphtha, Petroleum, Hydrotreated Light, Rosin Adduct Ester, Stoddard Solvent, Solvent Naphtha, Light Aromatic, Mineral Spirits, Methanol, 3-iodo-2-propynyl butyl carbamate, bus(1, 2, 2, 6, 6-Pentamethyl-4-Piperidinyl) Sebacate, Methyl Ethyl Ketoxime |
| Container Type | : | Can |
| Coverage Area | : | 150 to 200 sq-ft/qt |
| Density | : | 7 to 7.1 lb/gal |
| Drying Time | : | 8 hr |
| Flammability Rating | : | 2 |
| Flash Point | : | 49 deg C |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Odor/Scent | : | Solvent |
| Resin Type | : | Oil Phenolic Rosin Ester |
| Sheen | : | Flat/Matte |
| Specific Gravity | : | 0.862 |
| Temperature Rating | : | <49 deg C |
| VOC Content | : | 450 g/L |
| Vehicle Type | : | Oil Phenolic Rosin Ester |
| Viscosity | : | 25 cPs |
- Outstanding UV and moisture-resistant finish
- Great for marine use above the waterline
- Easy application and maintenance
SDS