Minwax 11500000
Assures even penetration of oil-based stains on soft or porous woods. Prepares wood to avoid blotching and streaking. Wood is ready for staining immediately after application. Covers approximately 75 to 125 sq-ft/qt.
| Application Method | : | Brush, Cloth |
| Boiling Point | : | 298.4 deg F |
| Color | : | Clear |
| Compositions | : | Light Aliphatic Hydrocarbon, Med. Aliphatic Hydrocarbon Solvent |
| Container Type | : | Can |
| Coverage Area | : | 125 sq-ft |
| Drying Time | : | 15 min |
| Flammability Rating | : | 2 |
| Flash Point | : | 100.4 deg F |
| Form | : | Liquid |
| Net Content | : | 1 gal |
| Odor/Scent | : | Mild Hydrocarbon |
| Specific Gravity | : | 0.79 |
| VOC Content | : | 350 g/L |
| Vehicle Type | : | Hydrocarbon Resin, Modified Linseed Oil |
| Viscosity | : | <20.5 cSt |
- Minwax® Pre-stain wood conditioner prepares bare wood for staining
- Treating the surface with pre-stain wood conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains
- It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch and maple
SDS